Aircatglobal VirtualFly TQ3+ Throttle Quadrant, User Manual

Page: 5 / 5

TQ3+ | User's manual
5
TQ3+ Configuration on X-Plane
X-Plane
1. Open X-Plane and go to Configuration\Joystick tab.
2. Select TQ3+ and calibrate the axes if required.
3. Assign the according action to each axis: Throttle-Prop-Mixture.
THROTTLE lever configuration:
- Reverse axis
unchecked .
- On Edit response curve check “Has beta/reverse detents”.
- On Edit response curve, Interp Mode select “Linear”.
- On Edit response curve adjust “Beta” and “Reverse” zones.
PROP lever configuration:
- Reverse axis
checked .
- On Edit response curve check “Set feather point”.
- On Edit response curve, Interp Mode select “Linear”.
- On Edit response curve adjust “Feather point”.
MIXTURE lever configuration:
- Reverse axis
checked .
- On Edit response curve check “Set mixture cutoff point”.
- On Edit response curve, Interp Mode select “Linear”.
- On Edit response curve adjust “Cutoff point”.
Through X-Plane Configuration\Joystick tab:
Full functionality:
Throttle-Rev, Propeller-Fth, Mixture-CutOFF.