RUDDO & RUDDO+ | User’s manual
3
2.2 CHANGING BRAKING AND RUDDER
CONTROL HARDNESS
Your RUDDO/RUDDO+ offers the possibility to adapt the
brakes and rudder pedals hardness to match your preference.
2.2.1 Brake hardness
As you can see in the diagram below, the rear part of each
pedal has one or two springs that offer resistance when the
brakes are pressed. You can use one (for softer braking) or two
(for harder braking) springs depending on your preferences.
Follow the next steps to add/remove one spring to change
the braking resistance from your RUDDO/RUDDO+.
A 3mm Allen key (not included) is needed to change the
springs.
1.
Unscrew one of the screws
from the rear part of the pedal.
2.
Add or remove the spring
(E) depending on your
preferences.
3.
Screw the removed screw
back into its original position.
4.
Repeat the process with the
other pedal.
