11
7
8
9
10
Plug in your unit and press the power
button
power-off
. Set your desired output level
by pressing the + or - buttons. Your DUET has five
output levels that are displayed by 1 (the lowest
output) through 5 (the highest output).
Press the humidity control button to
set your humidity level from 25% to
65%. Your mist output will pause when the set
humidity level is reached, and will resume when
the humidity dips below your setting. When set to
65%, your unit will run continuously.
Press the timer button
clock
to run your
DUET for a set period of 2, 4, 8, or 12
hours. The clock icon will show on the display
when the timer is on. Turn the timer off by pressing
the timer button again until it reaches 0.
Switch between cool and warm mist by
pressing the mist temperature button .
It will take the DUET a few minutes to reach the
warm mist temperature.
Press the light mode button to select
between the screen lighting, the screen
lighting plus the nightlight, the nightlight only, or no
lights (all of your settings will remain set).
7
8
9
10
11
Note:
The DUET is an ultrasonic humidifier, so it emits a very fine
mist. Position the nozzle to direct this mist away from furnishings
and electronics.
That’s it! Your DUET is ready to use.