Airborne Innovations
Picoradio Manual
3.5.3
Logical TCP connection to one remote serial port (easiest method to test with Pixhawk bidirectional
telemetry)
This could make sense for an application which connects to the serial port using a TCP style connection (such as
MissionPlanner's TCP mode, or the telnet commandline tool).
To configure this method simply use the server side connection from 'Hardware serial port connection between two
units – TCP' above. Note that the base station serial configuration should remain unconfigured, i.e. should not
connect as a TCP client to the airborne port. To connect to the serial stream you make a direct TCP connection to
the airborne radio on the TCP server port.
Recent versions of firmware also have a TCP timeout, it may be necessary to increase this value somewhat from the
default.
Airborne i.e. 192.168.168.2:
Then you can telnet to the port, for example:
telnet 192.168.168.2 20002
or in the case of MissionPlanner you can the TCP connection method
Page 11
Summary of Contents for Picoradio
Page 15: ...Airborne Innovations Picoradio Manual 3 9 2 Picoradio Input Power Cable one end cut Page 15 ...
Page 16: ...Airborne Innovations Picoradio Manual 3 9 3 Picoradio Ext Aux Power Cable one end cut Page 16 ...
Page 17: ...Airborne Innovations Picoradio Manual PicoRadio Ext Serial Cable one end cut Page 17 ...