EN
•
is there any obstacle blocking the air inlet/outlet?
•
is there any other equipment releasing steam indoor?
•
is the indoor temperature too low? the dehumidification capacity
will be weaken in low temperature and humidity environment
The air volume
becomes smaller
•
is the filter too dirty so that it blocks the air to enter inside?
•
is the air inlet/outlet of the machine blocked by something?
Significant noise
•
is there anything stuck on the fan in the air outlet?
•
is the machine tilted?
Leakage
•
is the machine tilted or dumped?
•
is there any water in the tank when moving the machine?
•
is the floating ball in the water tank fall off?
If the above FAQ can not solve your problems and need maintenance, please contact the supplier or after
sales service center. Please do not disassemble the machine to maintain by yourself.
Technical specification
Input: AC100-240V 50/60 Hz
Power: 45 W
Size: 195 x 215 x 315 mm
Noise: 45 dB
Working capacity: 750 ml/day (30 °C / 80 %RH)
Water tank capacity: 1000 ml
Suitable for rooms: 10-20 m
2
Certification: CE, EMC, WEEE
Disposal of the device (environment)
The European directive 2012 / 19 / CE on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the
recovery and recycling of the materials they contain and reduce the impact on human health and
the environment. The crossed out “wheeled bin” symbol on the product reminds you of your
obligation, that when you dispose of the appliance it must be separately collected. Consumers
should contact their local authority or retailer for information concerning the correct disposal of their old
appliance.
This product is in compliance with the essential requirements and other relevant provisions of EMC directive
2014/30/EU. The device was approved for use in EU countries, therefore, bear the CE. All necessary
documentation is available at the importer address.
Changes in technical parameters, properties, printing errors in the instruction manual reserved.
Importer address:
Bibetus s.r.o.
Loosova 262/1
Brno 638 00
Czech republic
E-mail: [email protected]
Page 5 of 5
