EN
SETTING OF THE ALARM TIME
To enter the alarm mode, press the MODE button in normal mode.
0:00 (default) or the last adjusted alarm time appears on the display.
Press and hold MODE button.
The alarm symbol appears and the minute digits will be flashing.
Press the UP button to set the minutes.
Confirm the setting with the MODE button and set the hours in the same way.
Confirm the setting with the MODE button.
The display shows the adjusted alarm time and the alarm symbol.The alarm is activated.
Press the MODE button again to return to the current time.
When the adjusted alarm time is reached, the alarm will ring.
Press any button and the alarm function will stop working.
If the alarm is not stopped manually, the increasing alarm will automatically turn off after certain
minutes and will be reactivated at the same time
The alarm symbol stays in the display.
When the alarm rings, press the SNOOZE button and the snooze function will be activated.
The alarm will be interrupted for 8 minutes.
ACTIVATE AND DEACTIVATE THE ALARM TIME AND THE HOURLY CHIME
To enter the alarm mode, press the MODE button in normal mode.
The adjusted alarm time appears on the display.
Press the UP button once to activate the alarm. On the display appears the alarm symbol.
Press the UP button twice to activate the hourly chime. On the display appears the symbol for the
hourly chime.
Press the UP button three times to activate the alarm and the hourly chime. On the dis-
play appear both symbols.
Press the UP button four times to deactivate both alarms. Both symbols disappear.
Press the MODE button to return to normal mode.
DISPLAY OF DATE
Press the UP button in normal mode to show the date.
TEMPERATURE DISPLAY
Press the °C/°F button to change between °C (Celsius) or °F (Fahrenheit) as temperature unit.
MAXIMUM AND MINIMUM VALUES
Press the MEM button.
MAX appears on the display.
The highest indoor temperature and humidity are displayed since the last reset.
Press the MEM button again.
MIN appears on the display.
The lowest indoor temperature and humidity are displayed since the last reset.
To go back to the present temperature and humidity display, press the MEM button once more.
The instrument will automatically quit the MAX/MIN mode if no button is pressed.
Press and hold the MEM button in the respective mode to clear the recorded maximum or minimum
values.
CARE AND MAINTENANCE
Clean your instrument with a soft damp cloth. Do not use solvents or scouring agents.
Remove the battery if you do not use the product for a long period of time.
Keep the instrument in a dry place.
Page 3 / 4
