Aira AAP-301 Owner'S Manual Download Page 12 | Manualshive

Page: 12 / 16

Aira AAP-301 Owner'S Manual Download Page 12

12

Filters Replacement

The machine can remind you to replace the filters, after working for 1899 hours, when
pressing the power button, the quality indicator light will shine to remind you of replacing the
filters. After replacing, press the power button until the fan runs, after 10 seconds, the total
working time will be cleared into zero. Then turn on it again, it can work normally.

Intelligent odor sensing system memory reset

instructions.

If the air quality indicator displays red color and the machine power is cut off suddenly, you
might have to reset the intelligent memory. Otherwise, the red color display will remain.

1.

Unplug the machine and wait for 15-20seconds.Plug again and start the machine and
press negative ion, timer or Sterilize.

2.

Keeps the machine working for 15 seconds. Repeat the first step above twice.

3.

Please perform the steps above extra in a clean environment without air pollution.
Otherwise the air quality display lights will be disrupted.

«
...
10
11
12
13
14
...
»

Summary of Contents for AAP-301

















Reviews:

No comments