Air 486PH, User Manual, Page: 30 / 48

Advanced Setup
Primary Display
Select the type of display monitor and Display controller card.
The VGA/EGA, CGA 40x25, CGA 80x25, or Monochrome are
supported. ‘Absent' option could be used if the system does not
have display card installed or for display cards that use TSR
files instead of BIOS firmware. The Optimal & Fail-Safe
default setting are
VGA/EGA ..
System Boot Up Num Lock
When the computer boots up, BIOS can either select Numeric
value or Cursor control functions for the numeric keypad of
IBM compatible keyboards. Most extended compatible
keyboards have separate cursor control keys. Therefore, the
default setting should be “On” to select Numeric value function
for the numeric keypad.
Floppy Drive Seek at Boot
This option allows the system BIOS to look for the floppy
diskette in the floppy drives during boot up process. This is
often set to disabled for systems which do not have floppy
drives. The default setting is
Disabled ..
Floppy Drive Swapping
This option allows the system to swap between two floppy
drives, drive A to drive B or vice versa, without physically
changing the cable setup. When Enabled is selected, floppy
drive A will become B, and floppy drive B will become A The
Optimal and Fail-Safe settings for this option are
Disabled.