Air 486PH, User Manual, Page: 22 / 48

Cooling fan installation
Mount the cooling kit with fan on top of the CPU. Connect
power to fan from power supply. Make sure the cooling kit’s
bottom surface makes proper contact with top surface of CPU.
!! Warning !!
Manufacturer of the board or CPU is not responsible for
damage to CPU because of improper handling
during installation or cooling kit with fan is not used.
INSTALLING DRAM SIMMS
When working with DRAM SIMMs,
it is extremely important that
you avoid Electrical Static Discharge (ESD).
Always ground yourself by wearing a grounded
wristband or ankle strap.
1. Power must be off while installing SIMMs.
2. The SIMM module should face to the right with pin 72 next
to the power supply connectors.
3. Insert the SIMM at a 45 degree angle, tilted towards ISA
slots.
4. Gently push the SIMM to an upright position until it "snaps"
into place.
5. Repeat above steps until the entire bank is filled.