21
Owner’s Manual: Air Water Life Aqua-Ionizer Deluxe 7.0
Installation Step 8 - Plug In Your Water Ionizer:
pH Testing:
A.) Confirm that the power outlet is a 120 V/60Hz and grounded
plugging in your water ionizer.
B. When you first plug the unit in, a water indicator, e.g., "Daily Drinking,"
will light. The LCD will not display, however, until water is flowing into the
unit. So, if you have not already done so, be sure you’ve switched on the
Faucet Diverter Valve and water is flowing into the unit.
C. When it initially starts up your water ionizer will briefly enter auto
cleaning mode.
unplug the water ionizer when it’s in auto
cleaning mode. Doing so can damage the unit.
Your water ionizers primary pH
settings are preset at the factory within the following ranges.
However,
differential regional, environmental and testing factors such as the
quality, pH level, Total Dissolved Solids (TDS) and temperature of the
source water as well as the flow rate through the water ionizer can all
cause variations in the pH level of the water dispensed from your
water ionizer. For example, the above referenced pH preset values
were derived from 68°-77° F (20°-25° C) source water with a neutral
pH of approx 7.0 containing 100 - 150 parts per million of Total
Dissolved Solids (TDS) flowing at 2L (0.5 gal) per minute.
Consequently, you may want to periodically test the pH settings for
each of the 7 water ionizer presets as described in this section. If pH
testing confirms that the presets already fall within the established
factory preset ranges, there is no need to do anything. If the settings
are slightly higher or lower than the factory presets, you may want to
move up or down to the next preset level.
BEFORE
NOT
Do
1. Factory pH Value Presets -
2. Impact of Environmental & Other Factors on pH -
(optional)
MAKE TEA &
NEUTRALIZE LIQUOR
COOKING
DAILY DRINKING
INITIAL DRINKING
CLEANING
CLEANING
= 9.5 - 10.5 pH
= 9.0 - 10.0 pH
= 8.0 - 9.0 pH
= 7.5 - 8.5 pH
(Most Municipal Tap Water is 7.0 pH)
= 6.0 - 7.0 pH
= 5.5 - 6.5 pH
PURIFIED WATER
Same pH as
Source Water
=
Alkaline Water Presets:
Filtered Water Preset:
Acidic Water Presets: