ScanX Rear Panel Connection Ports
4
3
2
1
Only one connection (USB,
Ethernet or WiFi) should be
used at any time.
1. USB
Connector -
Accepts USB Type B connector to connect ScanX for operation via a
single computer.
2. Wireless Adapter Connector -
Accepts USB Type A connector to connect a USB Wi-Fi adapter
allowing ScanX access to Wi-Fi network for operation.
3. Ethernet Network Cable Connection -
Accepts RJ45 connector to connect ScanX for
operation via the Ethernet.
4. 24VDC Connection -
Provides for connection of power supply unit providing ScanX
operating power.
Connect ScanX for operation.
ScanX may be connected for operation using
USB, Ethernet or Wi-Fi connections. Only one connection should be used at
any time. Refer to the ScanX Rear Panel Connection Ports illustration above
and perform the connection as necessary.
Connect ScanX with USB
. Remove the cover on the rear of ScanX and
connect the supplied USB cable between to the unit’s USB connection port
(item 1) and the computer. Perform the Electrical connection procedures
provided on the next page.
See installing and configuring
ScanX in the manual for
information on connecting to an Ethernet or Wi-Fi network.
Connect ScanX with Wi-Fi adapter
.
Remove the cover on the rear of ScanX
and connect the supplied Wi-Fi adapter to the unit’s wireless connection port
(item 2). Perform the Electrical connection procedures provided on the next
page.
Connect ScanX with Ethernet cable.
Remove the cover on the rear of
ScanX and connect the supplied Ethernet cable between the unit’s Ethernet
network connection port, item 3 and the facility network connector. Perform
the Electrical connection procedures provided on the next page.
