2.2 Procedure for Hardware Installation
2. Decide where to place your Wireless Access Point
You can place your Wireless Access Point on a desk or other flat surface, or you can mount it on a wall. For
optimal performance, place your Wireless Access Point in the center of your office (or your home) in a
location that is away from any potential source of interference, such as a metal wall or microwave oven.
This location must be close to power and network connection.
2.
Setup LAN connection
a.
Wired LAN connection: connects
an Ethernet cable from your computer’s Ethernet port to one of the
LAN ports of this product.
b.
Wireless LAN connection: locate this product at a proper position to gain the best transmit performance.
Figure 2-3 Setup of WLAN and LAN connections for this product.
4. Power on
Connecting the power cord to power inlet and turning the power switch on, this product will automatically
enter the self-test phase. When it is in the self-test phase, the indicators M1 will be lighted ON for about 10
seconds, and then M1 will be flashed 3 times to indicate that the self-test operation has finished. Finally, the
M1 will be continuously flashed once per second to indicate that this product is in normal operation.
AirLive WT-2000AP User’s Manual
8
