2. System and Network Setup
AirLive WN-250R User’s Manual 82
Broadcast ESSID (9):
Decide if the wireless router will broadcast its own ESSID
or not. You can hide the ESSID of your wireless router (set the
option to ‘Disable’), so only people those who know the ESSID
of your wireless router can get connected.
CTS Protect (10):
Enabling this setting will reduce the chance of radio signal
collisions between 802.11b and 802.11g/n wireless access
points. It’s recommended to set this option to ‘Auto’ or ‘Always’.
However, if you set to ‘None’, your wireless router should be
able to work fine, too.
WMM (11):
The short of Wi-Fi MultiMedia, it will enhance the data transfer
performance of multimedia contents when they’re being
transferred over wireless network.
If you don’t know what it is
/ not sure if you need it, it’s safe to set this option to
‘Enable’, however, default value is ‘Disable’.
After you finish these wireless settings, please click ‘Apply’ button , button, and the
following message will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on router setup, or click
‘Apply’ to reboot the router so the settings will take effect (Please wait for about 30 seconds
while router is rebooting).
