manualshive.com logo in svg

Air Live WN-200HD, User Manual

Share
Download
Air Live WN-200HD User Manual Download Page 55

4.  Monitor the Image Section 

 
 
 
 

 

 

AirLive WN-200HD User’s Manual 

50

Restore Setting:   

Click the “

Browse”

 button to locate the saved backup file and then click the 

“

Restore Setting”

 button. The settings will be restored to the previous 

configuration. 

 

 

 

 

Firmware Upgrade: 

The device supports new firmware upgrade (the software that controls the 
operation in the device). Please contact your dealer for the latest version if 
necessary.

 

 

Download the latest firmware file from our website or your dealer. Unzip this 
firmware file to binary file and store it into your PC. Then follow the steps as 
bellows carefully: 

 

1. Close all other application programs which are not necessary for firmware 
update. 

 

2. 

Make sure that only you access this device while firmware updating. 

 

3. Disable Motion Detection function. 

 

4. Click “

Browse

” button. Select the Firmware binary file.   

(

Note

 that it must make sure that the Firmware only applies to this device, 

once update, it will be burned into FLASH ROM of system.)   

Summary of Contents for WN-200HD








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands