Air Live WL-5480PAP User Manual Download Page 20

Page: 20 / 80

Backup Settings:

Click on “

Backup

” button, which will open a FileSave Dialog

box, where user gets to save all the current settings and configurations to a file.

Restore Settings:

Click on the “

Browse

” button to open a FileOpen Dialog box,

where user gets to select the file, which saves previous settings and

configurations. Upon selecting the saved file, click “

Restore

” and complete the

restore process when the access point re-operates after it restarts.

Restore to default settings:

Click on “

Default

” button to restore the access

point back to its manufacture default settings.

Firmware Upgrade:

Click on the “

Browse

” button to open a FileOpen Dialog

box, where gets to select the firmware file, which download from the web for the

latest version. Upon selecting the firmware file, click “

Upgrade

” and complete

the firmware upgrade process when the Access Point re-operates after it

restarts.

Summary of Contents for WL-5480PAP

















































































Search results

Summary of Contents for WL-5480PAP

Reviews:

Related manuals for WL-5480PAP

Brands by name

Popular brands

Air Live WL-5480PAP, User Manual

Search results

Summary of Contents for WL-5480PAP

Reviews:

Related manuals for WL-5480PAP

Brands by name

Popular brands