7
AirLive SI-108 User Manual
Successful: Green Indicator flashes TWICE
Unsuccessful: Red Indicator flashes TWICE.
5.Once you finished the IR Code Learning, please go to Configuration setting page on the
Gateway browser and input parameter number “27” and parameter value “000” to select the
dedicated AC code number “000” for learning.
Green Indicator flashes ONCE every time if receives a command from Gateway
Tips
• Make sure your Original Remote is in Power OFF Status.
• Make sure your Original Remote set FAN Speed to AUTO and FAN SWING to AUTO/ON
• Press and Hold the Power Key on Original Remote UNTIL SI-108 indicate Successful or
Not.
• User need at least Learn the OFF (Parameter Value 0), and one Temperature Mode
(Parameter Value 2 ~ 28) to complete the usage model.
• Keep away from Incandescent Light or Direct Sunlight during learning.
• Make sure IR Transmitter of your Original Remote alight with learning diode of SI-108, you
may also slight adjust closer or further away the distance between the two devices. For
some Remotes the IR transmitter is hidden behind a lens and may not be installed at the
center of the remote.
• Make sure the power is good on both devices, especially the Original remote. Use Fresh
Batteries in both devices is recommended.
