Air Live N.TOP User Manual Download

Page: 19 / 75

3. Configuring the N.TOP

AirLive N.TOP User’s Manual

The N.TOP offers web browser (http) as management interface.

In this chapter, we will

explain N.TOP’s web management interface and how to get into them.

3.1 Important Information

The following information will help you to get start quickly. However, we recommend you

to read through the entire manual before you start. Please note the password and SSID

are case sensitive.

The default IP address is:

192.168.1.254

Subnet Mask:

255.255.255.0

The default user’s name is:

admin

The default password is:

airlive

The default SSID is:

airlive

The default wireless mode is :

AP mode

After power on, please wait for 1 minutes for N.TOP to finish boot up

Please remember to click on “

Apply

” for new settings to take effect

You must reboot the N.TOP after you finish all the settings for changes to

take effect

The default regulatory domain is “

ETSI

” for Europe. If you are not living in EU

countries, you might wish to change the regulatory domain. However, please do

not choose regulatory domain that does not apply to your country. Using wrong

regulatory domain might be illegal.

By Default, the DHCP server is turned off, please to configure your PC’s IP

address manually.

Configuring the N.TOP

Summary of Contents for N.TOP












































































Search results

Summary of Contents for N.TOP

Reviews:

Related manuals for N.TOP

Brands by name

Popular brands

Air Live N.TOP, User Manual

Search results

Summary of Contents for N.TOP

Reviews:

Related manuals for N.TOP

Brands by name

Popular brands