Air Live CU-720PIR User Manual Download Page 25

Page: 25 / 97

4. Monitor the Image Section

AirLive CU-720PIR User’s Manual

4.2 Configure via Web UI

4.2.1 Network

Use this menu to configure the network to connect the device and the clients.

This section provides the menu for connecting the device through Ethernet cable.

MAC address:

Displays the Ethernet MAC address of the device. Note that a user can not change it.

Obtain IP address automatically (DHCP):

DHCP: Stands for Dynamic Host Configuration Protocol.

Enable this checked box when a DHCP server is installed on the network to issue IP

address assignment. With this setting, the IP address is assigned automatically. If this

device can not get an IP address within limited tries, the device will assign a default IP

address, 192.168.1.100, by itself as the default IP address.

IP address, Subnet mask, and Gateway:

If you do not select

Obtain an IP address automatically

, then you need to enter these

network parameters manually.

Summary of Contents for CU-720PIR


































































































Search results

Summary of Contents for CU-720PIR

Reviews:

Related manuals for CU-720PIR

Brands by name

Popular brands

Air Live CU-720PIR, User Manual

Search results

Summary of Contents for CU-720PIR

Reviews:

Related manuals for CU-720PIR

Brands by name

Popular brands