7. Appendix
AirLive BU-3026/BU-3026-IVS User’s Manual
54
z
Sensitivity:
Adjust sensitivity 0~100%, the higher sensitivity means more precisely
and detailed face detection.
z
Event Conditions:
Once you want to change the trigger condition, you have to select
the event interval by NONE, Daily, Hourly or User Define
and
Quantity. For example,
if you set Trigger Quantity for 5 people and interval with “1 Minute”, IP Camera
detects 5 faces will trigger alarm. In the following one minute, camera won’t trigger
alarm even though there are more than 5 faces are detected. After one minute,
camera will trigger alarm again if it detects 5 faces again.
z
Set Event Action:
Go to the Event Schedule to Add or Edit the IVS event.
z
Detection Result Overlay:
Select OFF, Privacy Mask or Rectangle to be shown on
the face when any face has been detected.
z
Calibration (Min. Face Size):
Face detection requires the min. face size is 20x20
pixels, so you can use this for reference.
z
Face Enhancement:
Enable this function for more accuracy.
z
Image Capture:
Enable this function to save the image to Samba server or SD card.
