1. Introduction
AirLive AirMax5X User’s Manual
3
This section is the page where Access Point mode is chosen. Therefore, it is
advised that you must read through the entire section.
4.3 Client Mode:
Here explains the WDS setting page.
4.4 WDS Access Point Mode
4.5 WDS Station Mode
4.6 AP Router Mode
4.7 Wireless ISP Mode
Chapter 5: Web Management 2: Configurations and Status
This chapter explains all the non-wireless settings and status such as IP settings,
Ping Watchdog.
5.1.5 PING Watchdog:
PING watchdog is a crucial function to keep your wireless connection alive.
When AirMax5X can’t get a response from remote devices, it will attempt to
re-establish the connection.
5.1.7 Configuration Save and Restore:
You should always backup your configurations so you can restore in the event
of system crash.
5.3 PoE Pass-through (Power up another device)
Chapter 7: Application Example: Infrastructure
In this chapter, you will learn how to use AP mode, Client Infrastructure Mode, and
Bridge Infrastructure mode in one application example. In addition, you will also
learn how to make multiple SSID and bandwidth control.
Chapter 9: Wireless Network Glossary
Explanations on wireless network technical terms from A to Z. Highly
recommended for referencing when you encounter an unfamiliar term.
1.4 Firmware Upgrade and Tech Support
If you encounter a technical issue that cannot be resolved by information on this guide, we
recommend that you visit our comprehensive website support at
www.airlive.com
. The tech
support FAQ are frequently updated with latest information.
In addition, you might find new firmware that either increase software functions or provide
bug fixes for AirMax5X. You can reach our on-line support center at the following link:
http://www.airlive.com/support/support_2.jsp
