manualshive.com logo in svg

Air Live AirMax5N, User Manual, Page: 56 / 98

Share
Download
Air Live AirMax5N User Manual Download Page 56

4. Web Management-Wireless and WAN Settings 

 

 

 

 

           

AirLive AirMax5N User’s Manual

 

51

4.4.7 Multiple DMZ 

Advanced Settings >> Multiple DMZ 

DMZ opens all TCP/UDP ports to particular IP address on the LAN side. It allows setting up 
servers behind the AirMax5N. 

 

 
 

Enable the DMZ function and then enter the local DMZ IP address. 

 
A DMZ server is a common term used to describe the default virtual server. If the DMZ 
server is selected, Internet traffic not destined for a valid virtual server is redirected to this 
privately addressed LAN client. This can be used together with a separate firewall device to 
perform additional security functions. 
 

4.4.8 Virtual Server Settings 

Advanced Settings >> Virtual Setting 
 

This allows you to specify one or more applications running on server computers on the 
LAN that may be accessed by any Internet user. Internet data destined for the specified 
public port will be directed to the specified private port number on the LAN client with the 
specified private IP address.   

 

Summary of Contents for AirMax5N



































































































Reviews:

No comments