Customer Service
1-800-248-0892
1
Check Valves
Low Pressure
Sensors
Harness #2
Harness #1
Panel Assembly
Fuse Box
Air Springs
(Previously Installed)
Power Wire
Power Wire
Fuse Adapter
In Line
15 AMP Fuse
Firewall
Grommet
Ground
Compressor
This kit is designed to operate between 5 and 100 p.s.i.
This installation should be done after the Air Spring kit has been installed.
If you have any questions, please call our Technical Service number: 1-800-248-0892.
by
With Low Pressure Sensors P/N 25812
MN-338
(04302)
ECN4031
FIGURE 1
Adapter #1
Adapter #2
Adapter #3 *
Adapter
Fuse
* Uses 3/16 (smaller) Female Push On Connector
INSET A
All pre-assembled gauge
panels have been 100%
leak and function tested.
Do not attempt to tighten,
loosen, or adjust any
fittings and connections.
This will likely cause a leak
or malfunction and void the
warranty.
