ON/OFF –
Plug in to a standard (120V AC) electrical outlet. The LED Display will turn
on for 2 seconds then turn OFF. Press the ON/OFF button once and the “Operating”
indicator will turn ON. Mist may not appear immediately; allow up to 15 minutes for the
water in the tanks to transfer to the base.
Mist Output –
When you turn the unit ON, it will default to the lowest mist setting. Press-
ing the “Mist” button will increase the output. Press once for Medium, twice for High, three
times for Supreme, four times for the Turbo Setting. Pressing the Mist button a fifth time
will bring the unit back to Low
.
NOTE: Turbo setting is intended for those wanting a
more powerful mist and works best while the Extension Nozzle is being used. The
Turbo setting will operate for 40 minutes and will then go to the Supreme Mist
Setting. User must wait 20 minutes before Turbo setting can be used again.
1
2
3
6
7
8
4
5
5
Operating Instructions
WARNING: DO NOT operate the humidifier without water in at least one of the tanks.
WARNING: NEVER lift the tanks OFF the Base while the unit is operating.
The Delay Start and Auto-Off buttons allow you to set the humidifier to turn
ON and OFF automatically as desired.
Delay Start – The Delay Start feature allows you to program the unit to turn ON
automatically. To use, press the “Delay Start” button once; you will see “Delay
Start” 01:00H illuminated on the display. This feature works in 1 hour
increments and is programmable up to 24 hours. Simply keep pressing the Delay
Start button until you get to your desired delay start time, once you have reached
the time the display will flash three times and then will start to countdown until
the unit turns ON.
Auto-Off –
The Auto-Off feature allows you to run the humidifier now and set it
to turn OFF at a specific time automatically (in 1 hour increments from 1-24 hours).
To use - press the “Auto-Off’ button once; you will see “Auto-Off” 01:00H illuminated
on the display. This feature works in 1 hour increments and is programmable up to 24
hours. Simply keep pressing the Auto-Off button until you get to your desired Auto-
Off time, once you have reached the time the display will flash three times and then
start to count down until the unit turns OFF. The display will start alternating
between the current ambient humidity and the Auto-Off Timer.
NOTE: You can use
the Delay Start and Auto-Off functions together on this fully programmable LED
Display to program the humidifier to turn ON and turn OFF at your desired times.
Humidistat –
By using this feature the humidifier will automatically monitor and
control the humidity level according to your desired setting. Once the desired humidity
level is reached the mist will shut OFF until the humidity drops below the setting and
then the mist will turn back ON automatically to maintain the humidity level desired. To
set this feature press the “Humidistat” button to your desired setting. Settings range
from 40%-95% RH (Relative Humidity) in 5% RH increments. A 40%-60% Relative
Humidity is recommended. Once you set your desired humidity, the number will flash
three times and then the display will revert back to the Relative Humidity. To view the
set humidity level, press the Humidistat button once.
Beep/Dim –
The humidifier automatically defaults to an audible beep when
changing settings, the waterless indicator will illuminate and you will hear three beeps
when the humidifier is out of water and the LED Display will be illuminated.To disable
one or more of these settings, follow the steps below: Press Beep/Dim once to disable all
sound (Beep Off will flash on the display three times and then will remain on the display
to indicate the sound is OFF). Press the button twice to turn the LED Display OFF (sound will
remain OFF) and press a third time to enable the LED Display and the sound (default function).
LOW Water –
When the tanks are out of water
the “waterless” indicator will appear in the display,
you will hear three beeps and the automatic safety
shut-off will turn the Ultrasonic Nebulizer & unit
OFF. Note: You can disable the audible beep by
pressing the Beep/Dim button once. To re-enable,
press the Beep/Dim button two more times.
Extension Nozzle –
To convert this unit from a Tabletop unit to Floor unit simply
remove the Dual Directional Mist Nozzle from the top of the Left Water Tank. Place
the unit on your desired floor area and insert the Extension Nozzle into the Top of the
Left Water Tank. Then place the Dual Directional Nozzle on the top of the Extension
Nozzle.
WARNING:
Be sure the unit is unplugged and turned OFF when
changing the Nozzles.
Remote Control –
Be sure to remove the clear
pull tab before using the
remote.
The functions on the Remote
Control mirror those on the
humidifier from Low to Supreme.
When using the Remote Control,
you can control the humidifier
from your desired location.
NOTE:
The Turbo function cannot
be controlled by the Remote. In
order to operate the Turbo setting
it must be controlled manually
on the unit.
