CLIMBING WALLS
2.
Drive vehicle
towards
wall with the
joysticks in
the forward
position.
Turn the
ON/OFF
switch on
the Vehicle
to “ON”.
1
4
3
2
3.
Fans will
automatically
engage once
the vehicle
reaches a 45°
incline on the
wall.
4.
Once wall
Climber is
parallel to the
wall, it will start
to climb.
Use the
controller to
drive the vehicle
full function on
the wall.
5.
If your wall has baseboard trim at the
bottom of the wall, the vehicle may not
be able to make the transition.
Use the cut out ramp on the insert of
the package to bridge the gap as shown.
IMPORTANT: Place your ramp as tight
to the wall as possible. Your ramp should
be close to 90° from the floor and tight
against the wall.
5
1.
Drive vehicle
forwards or
2.
Backwards
towards floor.
2
1
3.
Make sure
vehicle is
pointed
straight down
when climbing
off wall.
NOTE:
The vehicle
can exit
forwards and
backwards.
CLIMBING OFF WALLS
3
4
5
4.
Fans will
stop once
vehicle
angle to
the floor is
less than
45°.
