2
SAFETY
FIRE OR EXPLOSION HAZARD
1. Lacquering materials applied with the device may be flammable or explosive. Use the spray gun in well-
ventilated lacquering cabins. Avoid ignition sources, including open fire, electric arc, etc.
2. Never use chlorinated hydrocarbons (e.g. trichloroethylene, ethyl chloride, etc.) as solvents, because they may
react chemically with aluminium and zinc-coated elements and bring about explosions. Make sure that the
solvents being used are safe in contact with aluminium and zinc. In case of doubts contact your solvent
supplier.
3. In order to avoid static discharges - earth the painted object and spraying equipment.
HAZARDS DUE TO IMPROPER OPERATION
1. Never turn the spray gun outlet towards the human body.
2. Never exceed the maximum working pressure.
3. Cut off compressed air and lacquering material supply hoses before performing any servicing and maintenance
operations.
4. The spray gun needle has a sharp tip. It is forbidden to touch the needle tip and/or bring it close to the human
body.
HUMAN BODY PROTECTION
1. Work with the spray gun only in large and ventilated rooms (lacquering cabins). Failure to follow this
instruction may result in intoxication and/ or fire.
2. Always wear working clothing (safety goggles, face-mask, gloves). Lacquers and substances used in the
lacquering industry are toxic. If you feel that something wrong has happened to your eyes or skin, immediately
contact a doctor.
3. Wear earplugs if necessary. Noise level generated while painting does not exceed 85 dB (A).
4. Stop work whenever you feel tired. Pressing the release trigger makes your hand tired, and the
lacquering process may affect your physical and mental state.
OTHER HAZARDS
1. Do not modify the spray gun in any way.
2. Never perform any work within the range of operation of robots, conveyors, etc., unless these machines are
disabled.
3. Never spray any foodstuffs and/or chemical compounds.
-
This spray gun should be operated by a trained worker.
-
Make sure that the spray gun has not been damaged in transport.
-
Supplied air has to be dry and pure.
4. If any element of the spray gun does not work or works abnormally, immediately stop work and
continue only after having eliminated the defect.
Summary of Contents for AZ30 HTE
Page 7: ...7 NOTES...
