AIR GAP Fluidmaster 6000 Series Installation Manual Download Page 4

Page: 4 / 8

OFF

6000 Series AirGap™ Installation Guide

Removing your old valve

Step 2

Measure or mark the water level
inside your cistern. Drain all water
from the cistern and disconnect valve
supply pipework.

Step 3

Remove the old valve from the cistern
and ensure the fixing hole area is
clean and free of debris or anything
which may impair sealing.

Step 1

Turn off the water supply to the toilet
using isolation valve or mains
stopcock.

Summary of Contents for Fluidmaster 6000 Series

Page 1: ...ation Guide Bottom entry valve assembly Float adjustment screw 1 Cap 2 Anti siphon vortex generator 3 Float chamber locking sleeve 4 Washer 5 1 2 or 3 8 BSP threaded shank 6 Nut 7 Pre fitted flow controller and filter 8 INSTALL WITH CONFIDENCE ...

Page 2: ...Series AirGap Installation Guide Side entry valve assembly Float adjustment screw 1 Cap 2 Anti siphon vortex generator 3 Float chamber 4 Washer 5 1 2 or 3 8 BSP threaded shank 6 Nut 7 Pre fitted flow controller and filter 8 ...

Page 4: ... your cistern Drain all water from the cistern and disconnect valve supply pipework Step 3 Remove the old valve from the cistern and ensure the fixing hole area is clean and free of debris or anything which may impair sealing Step 1 Turn off the water supply to the toilet using isolation valve or mains stopcock ...

Page 5: ... will benefit from the removal of the flow controller and filter Mains water or pumped installations require the filter restrictor to be fitted Note For side entry valve ensure the flow controller and filter is fitted in the orientation as shown Step 5 Check that the sealing washer is pushed fully onto the threaded shank ...