6. Using a 1/4” hex head screw driver, secure the Ballast Assembly to the Re-
tainer Ring with four self tapping 3/4” screws being careful not to overtighten
stripping the screw holes. When mounting to a fiber glass duct the adhesive
gasket will help secure the unit, but the four hex screws are still required to
secure the Ballast Assembly.
7. Using a 1/4” hex head screw driver, secure the power adapter with four self
tapping 1/2” screws.
8. Adhere the two included warning labels in close proximity to the CAP device.
Make sure the duct is clean and dry before adhering the warning labels.
9
Air Flow Label
Ballast Assembly
Aluminum Tape Ring
Retainer Ring