14
-
Press the “WIND” button to select wind speed.
6.3 Dehumidifying operation
Press the “Mode” button until the “Dehumidify” icon appears.
-
Automatically set the selected temperature to current room temperature minus 2
℃
. (16
℃
-31
℃
)
-
Automatically set the fan motor to LOW wind speed.
6.4 Fan operation
-
Press the “Mode” button until the “Fan” icon appears.
-
Press the “WIND” button to select wind speed.
6.5 Heating operation (this function is not available for the KYR-25CO/AG unit)
-
Press the “Mode” button until the “Heat” icon appears.
-
Press the “DOWN” or “UP” button to select a desired room temperature. (16
℃
-31
℃
)
-
Press the “WIND” button to select wind speed.
6.6 Timer operation
Timer ON setting:
-
When the air-
conditioner is OFF, press the “Timer” button and select a desired ON time through the
temperature and time setting buttons.
-
“Preset ON Time” is displayed on the operation panel.
-
ON time can be set to any time from 0-24 hours.
Timer OFF setting
-
When the air-conditioner is
ON, press “Timer” button and select a desired OFF time through the
temperature and time setting buttons.
-
“Preset OFF Time” is displayed on the operation panel.
-
OFF time can be set to any time from 0-24 hours.
6.7 Auto SWING
After machine turns on, press this key, the louver will swing continuously left and right; by pressing this
button again the movement will stop and the louver will remain in that position. (Some models).
6.8 SLEEP mode
- While in cooling mode, press the SLEEP key to set the temperature. It increases 1
℃
after an hour and at
most increases 2
℃
after 2 hours.
- While in heating mode, press the SLEEP key to set the temperature. It decreases 1
℃
after an hour and
at most decreases 2
℃
after 2 hours.
- Press the SLEEP key again to cancel the setting.
6.9 Water drainage
Water Full Alarm
The inner water tank in the air-conditioner has one water level safety switch, it controls the water
level. When water level reaches an anticipated height, the water full indicator lights up. When
the water is full, please remove the bung/stopper from the drainage outlet at the bottom of unit,
and drain all water outside.
Continuous Drainage/Storage
-
- When you plan to leave this unit unused for a long time, please remove the rubber
bung/stopper from the drainage hole at the bottom of unit, and drain all water outside.
-
You can use the continuous drainage with a drainage hose connected to the bottom drain hole,
when the unit is working in HEAT mode.
-
The continuous drainage is not required when the unit working at the COOL or DEHUMIDIFY
mode. The unit can evaporate the condensate water automatically itself using a water splash
Summary of Contents for KYR-25CO/AG
Page 2: ...2...