1. After powered on, press ON/OFF button, the unit will start to run.
2. Press MODE button, select desired running mode.
3. Pr or - button, to set the desired temperature. (It is unnecessary
set the temp. at AUTO mode.)
4. Pressing FAN button, set fan speed, can select AUTO, FAN 1, FAN 2,
FAN 3 or FAN 4.
(Note:When select Fan 4, the fan speed is same as fan3 on this unit)
5. Pressing SWING button, to select the swing.
1. Press SLEEP button, to set sleep.
2. Press TIMER button, can set the scheduled timer on or timer off.
Guide for operation-General operation
Guide for operation-Optional operation
1.
4.
2.
3.
★
Slightly to press the place to take out the back cover of wireless
remote control.(As shown in figure)
Take out the old batteries. (As show in figure)
Insert two new AAA1.5V dry batteries, and pay attention to the polarity.
(As show in figure)
Attach the back cover of wireless remote control. (As show in figure)
When changing the batteries, do not use the old or different batteries,
If the wireless remote control will not be used for a long time, please
otherwise, it can cause the malfunction of the wireless remote control.
take them out, and don't let the leakage liquid damage the wireless
remote control.
The operation should be in its receiving range.
It should be placed at where is 1m away from the TV set or stereo sound sets
.
If the wireless remote control can not operate normally, please take them out,
after 30s later and reinsert, if they cannot normally run, please change them.
NOTE:
●
●
●
●
●
Changing batteries and notices
OPERATION OF WIRELESS REMOTE CONTROL
(Note: Not available on this unit)
Introduction for special function
When AUTO RUN mode is selected, the setting temperature will not be
displayed on the LCD, the unit will be in accordance with the room temp.
automatically to select the suitable running method and to make ambient
comfortable.
★
About AUTO RUN
Under switch-on or switch-off state, you may hold "+" and "-" key
simultaneously to lock and unlock the keypad. When locked, the display
will show the LOCK icon, in which case the lock icon will flash three times
upon operation of any key. After the keypad is unlocked, the lock icon on
the display will be hidden. After being energized, the default is unlock.
About switch between Fahrenheit and Centigrade
Under switch-off state, you may hold "-" and "MODE" keys simultaneously to
switch between
℃
and
℉
.
★
★
About LOCK
Under switch-on or switch-off state, you may hold "+" and "FAN" key simultaneously for 3
seconds to set the lamp on or off and send the code. After being energized, the lamp is
defaulted on.
★
About Lamp
5
