1. Place the unit in the desired location
2. Before operating the unit, check to see if the fan
speed knob is in the OFF POSITION
2. Plug one end of the electrical cord to the socket
in the back of the Triton 440
3. Place the other end of the electrical cord into an
electrical outlet
4. Turn the speed knob clockwise to your desired
fan speed setting.
ALWAYS
use safe and common sense precautions when working with Air-Care equipment. Do not
block walkways with equipment. Remove delicate and breakable articles from the immediate work
area. The following are precautions that should be reviewed by all persons who will be involved in the
cleaning activity.
• Other than the filters, there are no user serviceable components in the Triton 440. Only trained
technicians should attempt to make internal repairs on this equipment.
• Always turn off the main power switch on the control panel, or disconnect the power before opening
or removing the back or removing the filters from the Triton 440.
• Be sure all power cords and electrical extensions are rated to meet or exceed the original Air-Care
power cords (12 gauge), and inspect all AC power plug to be sure the Ground Pin is in place.
• Never connect power to Air-Care equipment unless all covers, and safety shields are in place.
Mechanical and electrical parts.
• Never allow anyone except a properly trained technician to use the equipment or/and cleaning
products.
• All Air-Care equipment is designed for US standard 115 volt, 60 Hz AC. Most Air-Care equipment
can be special ordered to meet other worldwide standards for a reasonable price and delivery
schedule. Always check the specifications on the equipment before connecting electrical power
to Air-Care equipment. The Triton 440 can be special quoted for 220 Volt 50 Hz but may incur
additional costs and may not provide the same performance as the 60 Hz model.
SAFETY PRECAUTIONS
OPERATING THE TRITON 440
VERY IMPORTANT SAFETY INFORMATION
DO NOT TURN ON THE
TRITON 440 PURIFIER WITH THE ACCESS DOOR OPEN
Page 5
