When the outboard motor is tilted for a prolonged time while the boat is moored or
trailered,make sure to follow the procedure listed below.
⚫
Disconnect the fuel hose from the fuel joint on the outboard motor and install the feul
joint cap.
⚫
Tighten the built-in fuel tank cap securely.
⚫
Tighten the air vent screw or close the air vent valve,and then close the fuel cock.
⚫
Tighten the portable fuel tank cap and its air vent screw.
The outboard motor should be transported and stored in the normal running position.If
there is insufficient road clearance in this position,then trailer the outboard motor in the
tilted position using a motor support device such as a transom saver bar.Consult your
dealer for further details.
Dismounting the outboard motor
Do not hold the top cowling or tiller handle when mounting or dismounting the
outboard motor. Otherwise,the outboard motor could fall.
1. Stop the engine and land the boat.
2. Tighten the fuel tank cap securely and Tighten the air vent screw or close the air vent
valve.
1. Air vent screw
2. Fuel tank cap
3.Align the fuel cock with the closed position.
1.Closed position
1