TIP:
It is not necessary to use the choke when starting a warm engine,such as immediately after
the outboard motor has been operated under a load.
5. Pull the manual starter handle slowly until you feel resistance.Then give a strong pull
straight out to crank and start the engine.If the engine does not start on the first try.repeat
the procedure.
6. After the engine starts,slowly return the manual starter handle to its original position
before releasing it.
7. Warm up the engine.For further information,see page 41
8. Return the choke knob to its original position gradually.
9. Slowly return the throttle grip to the fully closed position.
Checks after starting engine
Cooling water
Check for a steady flow of water form the cooling water pilot hole.A continuous flow of water
from the pilot hole indicates that the water pump is pumping water through the cooling
water passages.If the cooling water passages are frozen,if may take a while for water to
start flowing out of the pilot hole.
NOTICE
:
If water is not flowing out of the pilot hole at all times while the engine is