AIPTEK SeeMe HD, Manual

Page: 4 / 157

4
Charging the battery
Connect the camcorder to your computer or other power supplied USB port.
Please charge the battery at least 8 hours for first time use.
1. Connect one end of the supplied USB cable to the USB port of the camcorder and the
other end to a powered PC. Make sure the camcorder is powered off.
2. The charging LED turns red and the charge starts.
3. When the charging is interrupted or the battery pack is fully charged, the charging LED
will turn off.
Connecting to PC / Notebook
Push the USB connector lock to the direction shown “OPEN”, then the USB connector will
eject automatically. Connect the USB connector to the USB port on PC / Notebook. If the
camcorder is powered off when connected to PC / Notebook, it will only charge the battery.
You should power on the camcorder before or after connecting it to PC / Notebook, then can
access the camcorder storage to view the recordings.
You can only read the recordings in the internal memory or memory card instead of
saving files to them.
When using a PC to charge the battery, do not power on camcorder, or the charge
will stop.