EN
User’s Manual
8
If the projector is functioning properley, please check the following before
you contact an authorized service center.
Unable to project from
PadUnit
• Check the PadUnit is properly stacked on
top of the Projector.
• Check the external HDMI cable is
unplugged from Projector.
• Check the Projector has a power supply
(DC-In or Powerbank)
• Check that Windows 10 is completely
loaded. It takes a few minutes after
pressing the power key.
• Check if the PadUnit is in sleep mode.
• Press power key to wake up the PadUnit.
• Unstack the iBeamBlock components and
stack them again. Then power on the
Projector and PadUnit.
• It may be caused by the PadUnit
abnormally powered off or shutdown,
please restart Projector and PadUnit for
Win10 recovery.
• Unstack the iBeamBlock components and
stack them again. Then power on the
projector and PadUnit.
The PadUnit shows
abnormal message
Troubleshooting
May be caused by the wrong display setting
of PadUnit.
• Long press the PadUnit screen to get the
right menu
• Go to the Graphics Options to change the
setting to: Output To/Clone Displays/Digital
TelBuilt-in Display.
If projection screen is
different from PAD
Symptom
Solutions