background image

EN

User’s Manual

2

The CE marking certifies that the product meets the main 

requirements of the European Parliament and Councils directives 

EN55022 and/or EN55024 on information technology equipment, 

regarding safety and health of users and regarding electromagnet-

ic interference.

The declaration of compliance can be consulted on the site www.aiptek.de .

Packaging

:

 The presence of the logo (green dot) means that a 

contribution is paid to an approved national organisation to 

improve package recovery and recycling infrastructures. Please 

respect the sorting rules set up locally for this kind of waste.

Batteries

:

 If your product contains batteries, they must be 

disposed of at an appropriate collection point.

The crossed-out waste bin stuck on the product means that the 

product belongs to the family of electrical and electronic 

equipment. In this respect, the European regulations ask you to 

dispose of it selectively;

•  At sales points in the event of the purchase of similar equipment.

•  At the collection points made available to you locally (drop-off center, 

   selective collection, etc.).

In this way you can participate in the re-use and upgrading of Electrical 

and Electronic Equipment Waste, which can have an effect on the 

environment and human health.

The paper and cardboard packaging used can be disposed of as 

recyclable paper. Have the plastic wrapping recycled or dispose of it in 

the non-recyclable waste, depending on the requirements in your country.

Summary of Contents for iBeamBlock Pad Unit










Reviews: