AIPTEK HDDV 8000, User Manual

Page: 88 / 425

40
Addenda
When using the camera:
Problem Cause Solution
The camera can not be
powered on normally.
The batteries are out of
power.
Replace the batteries.
The batteries are incorrectly
installed.
Re-install the batteries.
Low quality batteries are
used.
Use alkaline or rechargeable NiMH
batteries. DO NOT use different
brands or types of batteries at the
same time.
The camera is still powered
on, but the LCD screen does
not display.
If the camera stays idle for
over one minute, the LCD
screen will automatically shut
down to save power.
Press any button except the power
button to reactivate the display.
The LCD display is disabled.
Press the Enter button to
switch on the display.
The TV Out function is
enabled.
Turn off the camera and then turn
it on again.
Can not take pictures or
video clips when pressing
the Shutter or Record
button.
Out of memory.
Free some space from the memory
card or the internal memory.
The camera is recharging the
flash strobe.
Wait until the flash strobe is fully
charged.
LCD icon error after
instering a memory card.
The card is not correctly
inserted.
Remove the card and insert it in
correct direction.
1. The CF card cannot be
identified by the camera.
2. The LCD screen displays
“MEMORY ERROR” or
“CARD ERROR” message.
The format of the memory
card is not compatible with
the camera.
Use the camera “Format” function to
format the card.
The memory card is
corrupted.
Replace the memory card with a
new one.
Troubleshooting