Detach the USB connector as indicated,
and then unfasten the battery cover to
remove the cover.
Place the accessory Li-Ion battery into
the compartment. Note that the metallic
contacts must be aligned with the
contacts in the compartment.
3
Replace the cover.
When using for the first time, please fully charge the battery for
at least 8 hours.
Getting Started
Loading the battery
Detach the USB connector and plug it into a USB port on a powered PC. Make
sure the camcorder is powered off.
The charging LED turns red and the charge starts.
3
When the charging is interrupted or the battery pack is fully charged, the charging
LED will turn off.
When using a PC to charge the battery:
) Do not power on the camcorder or the
charge will stop.
2) If necessary, use a USB extension
cable to extend the connection.
Charging the battery
Summary of Contents for AHD-1
Page 1: ......
