– 9 –
NHR-SP
NHR-3TS
One lamp is used.
NHR-7A
(w/o cord)
NHR-3A-4
NHX-50M
Pull down
to lock.
White
Common Area Urgent Staff Call
1.
Slide down switch on the call station.
2.
NHR-3TS corridor lamp blinks white.
3.
The NHX-50M master station is called by tone & LED (urgent call level).
4.
Press TONE-OFF button and go to calling location. Unlock the switch by sliding it upward.
Bathroom call
NHR-SP
NHR-3TS
NHR-7A
NHX-50M
NHR-7A
Pull down
NHR-3A-4
Red
selector
LED is lit.
Press selector button
of the bedside sub station.
PRE-TONE
NH-1SA/A,
NH-1SA,
NH-2SA/A
or
NH-2SA
Placing a call to Bedside sub
The NHX-50M initiates a selective call to a bedside sub station NH-1SA/A, NH-1SA, NH-2SA/A or NH-2SA.
1.
Press the selector button of the sub station desired.
2.
Either press TALK button or lift handset, and the channel is established.
3.
Communicate with the bedside sub.
4.
At conclusion, hang up handset or press OFF button.
At sub station;
A call from the NHX-50M is initiated with a pre-tone. When communication is heard from NHX-50M, simply
talk back toward the sub station.
Note; The NHX-50M has 15-second selection timer. Within that time, the last sub communicated with will be
connected if the handset is picked up or TALK button is pressed.
Common Area Urgent Bathroom Call
1.
Pull down Pullcord on NHR-7A.
2.
NHR-3TS corridor lamp blinks red.
3.
The NHX-50M master station is called by tone & LED (urgent call level).
4.
Press TONE-OFF button, and go to calling location. Unlock the switch by sliding it upward.