DEIMOS GERMANIUM FUZZ
21
ENCLOSURE LAYOUT: PANEL MOUNTS
Attach the hardware to the enclosure as shown. (The I/O board is done in a later step.)
MOUNTING NUT
MOUNTING NUT
DRESS NUT
LOCK WASHER
MOUNTING NUT
LOCK RING
MOUNTING NUT
OUTER WASHER
LOCK WASHER
DUST CAP
FOOTSWITCH
BEZEL & LED
The dress nut fits over the top of the mounting nut and is for aesthetic
purposes only. Wrap a rubber band around it to use as a grip when tightening.
Do not use metal tools on it or you run the risk of scratching or denting it.
You’ll need to hold the bezel in place when
tightening the nut. The top of the bezel is fairly
sharp, so try using a rubber band for grip instead
of pressing your finger against the bottom.
The LED will just
sit loosely inside
the bezel for now.
POTENTIOMETERS
Fuzz: 1kC
Level: 100kA
125B
1kC
100kA
FOOTSWITCH
BEZEL
& LED
DPDT
on-on
