AIMS Power GEN3850W120VD, Manual, Page: 19 / 23

19
CAUTION
The engine should never run without the element;
excessive piston and/or cylinder wear may result.
CLEANING AND ADJUSTING SPARK PLUG
1. Remove the cover.
2. Check for carbon build-up and remove the carbon.
FIG.33
3. Check the spark plug type and gap.
4. Install the spark plug.
5. Install the cover.
CAUTION

Standard electrode color: Tan Color.

Standard Spark Plug: F7RTC (TORCH)

Spark Plug Gap: 0.6-0.7 mm (0.024-0.028 in)
FUEL TANK FILTER
1. Remove the fuel tank cap and filter. FIG.34
2. Clean the filter with solvent. If damaged, replace.
3. Wipe the filter and insert it.
WARNING

Be sure the tank cap is tightened securely.
MUFFLER SCREEN
WARNING

The engine and muffler will be very hot after the engine has been run.

Avoid touching the engine and muffler while they are still hot with any part of your body or
clothing during inspection or repair.
FIG.34
FIG.33