AIMLINE Compact-PA
Aimline –
www.aimline-audio.com
-3-
You will see three sliders:
1.
Slider: Main-Control
•
Access to the main-gain (volume)
•
Mute the column
•
Setting a delay to the column (using the fader or enter the
value numeric in meter, cm or ms
•
Activating and setting value for the limiter
•
Activating and setting value for the gate
2.
Slider: Beam-Control
From here you have access to all parameters for a focussed aiming
of the acoustical energy to where it should go:
•
Column Elevation: Enter the value of the bottom-line of the
column to the ground (using the fader or enter the value nu-
merically
•
Focus distance: Enter the desired coverage-range for the room
(using the fader or enter the value numerically)
•
Focus Elevation: Enter the value for the desired elevation of
the beam (distance from the ground), (using the fader or en-
ter the value numerically)
•
Opening angle: Enter the value for the desired opening angle
between 6 and 14 degrees
