AIMLINE Compact-PA
Aimline –
www.aimline-audio.com
-2-
The Aimline Compact-PA consists of three modules:
The subwoofer with trolley-function and integrated electronics and amps
and two column-speaker modules.
Take the column module, that has one connection unit at the bottom
and
the top and place it to the connector at the subwoofer.
Take the column module that has one connection at the bottom and place
it on top of the lower module.
Connection your speaker
1.
Connect the Mains with a power-cord
2.
Connect the USB-Port with an USB-Port of your computer
The maximum length can be 5 meters.
3.
Connect your audio-signal to the ALC compact pa using a XLR or a
jack –connector.
4.
Switch on the power.
5.
Turn on the master volume control
6.
Use the bass volume control to increase or decrease the power of
the subwoofer.
Installation of the Software AIMLINE-Control:
Die file AIMLINE CONTROL .exe is a compressed installation-file for the
software.
Start the file AIMLINE-CONTROL.exe, the installer starts and leads you to
the installation-process. The USB-driver has to be installed as well.
1.
To make the connection to the speaker:
2.
Be sure all connections are done. Please wait until the driver for the
com-port is installed
3.
In the menu “SETTING” choose “CONNECTION”
4.
Choose the right com-port for this connection (you can find the
com-port in your windows-system looking for by right-click on
“Computer” > “Properties” > “Hardware” > “Device-Manager” >
“Com &LPT-Ports” to see what Com-port has been installed)
Please notice: Setup the right SCAN RANGE for the device-ID you
have in your network. The device-ID is written on the label of each
speaker on the back.
5.
Click o.k. to scan the com-ports. The software does a scan and in
the left side of the software-window under “group” all Aimline-
Columns should appear and be marked with a green dot, showing
they are online.
6.
A double-click on one of the online-columns opens the control-
window for this selected column.
