13
2019/11/12 V1.2+V1.0
without setting, after pressing, the preset is speed; during
operation, press SCAN key again, then the display screen
will show the current chosen items.
10.2. Regular operation
After turning on the power switch of the recovering machine, enter into the controller wire
connection mode, at that time, the beeper will make “beep” sound, and the display screen
will show “CHECK” letters. After wire connection, the preset data on the screen will be 0
and no blink.
and
light are on constantly, and this show the recovering
machine is under standby status.
AUTO mode (Actuated by motor)
Press ”START” to start the machine, and the machine will show GO at first, and operate
with the initial speed LEVL1 (10RPM). At that time, press
to accelerate or
decelerate, the range: LEVL1-15(10-25RPM), Step is 1. After pressing STOP, the machine
will stop and go back to the standby status. During operation, press the SCAN key
manually to choose, and speed
cal
dist
time show orderly. When without setting, after
pressing start, the preset is speed. During operation, press SCAN key again, then the
display screen will show the current chosen items.
2-1. During operation of AUTO mode, when the motor is blocked by the external force for
about 3 seconds, it will start the reversed rotation.
MANU mode (Manual mode)
Press START to start the recovering machine in manual mode, and the machine will show
GO at first, then execute MANU resisting mode with initial data LEVL1 and the resisting
range is LEVL1-15, Step is 1. Manual mode operates for 2 seconds the resistance will be
larger and larger. Stop for 2 seconds the resistance will be zero. After pressing STOP, the
machine will stop resistance and back to standby status.
