Aimco UDBP-T40, Instruction Manual, Page: 7 / 20

- 7 -
11. Overload protect function of motor
・
This function will work to stop the motor when the anvil becomes
locked for about 1 second with the trigger depressed.
12. Use appropriate tool whose capacity can cover the requirements of your
work.
・
Only connect sockets or bits appropriate to the size of the tool anvil.
13. Perform regular maintenance inspections.
・
Check power cord for damages periodically, request replacements
if damage is observed.
・
Maintain handle grips in a clean, dry condition. Avoid and oil or
grease.
14. Do not wet battery by water, seawater or other fluids.
15. Charge battery by designated charger always. Charging the battery by
non- designated charger will damage battery and can create an unsafe
condition.
16. Battery has fixed electrodes of positive and negative. Do not connect
battery and the charger when you feel difficulty in connecting the battery
to the tool or charger. Incorrect alignment of positive and negative
terminals will result in battery damageor injury.
17. Do not make any connections to the battery terminals on the battery or
charger by any other means than normal connections as intended in the
design of the tool. Any non-standard connections may result in damage
or injury.
CAUTION