Aimco UDBP-T40, Instruction Manual, Page: 6 / 20

- 6 -
4. Cautions for tool’s operation
・
Confirm that no person interferes with work environment or is in a
hazardous position.
・
Stop the operation at once, and request service if abnormalities are
found with the tool’s operation.
5. Do not do recklessly handle the power cord of the charger.
・
Do not pull or hold the power cord to disconnect the power cord or
carry the charger.
・
Arrange the power cord so it may not be stepped on, caught, or
stressed. Not doing so can cause early breakage.
6. Check for damaged parts.
・
Confirm that the tool functions normally before operation by visually
checking the appearance of the battery connection.
・
Do not use charger if it is damaged by a drop or is with damaged
power cord. Use of such a charger can cause electric shock or fire.
7. Keep the work place clean always.
・
Untidy place or work stand becomes a cause of accidents.
8. Keep children away from work place.
・
Do not allow others except authorized operators to touch the tool or
power cord of the charger.
・
Keep others except authorized operators away from the work place.
9. Store the tool properly when not in use.
・
Keep the tool in a safe place out of the reach of children safe place
or in a locked place.
・
Do not keep the tool in the place where the temperature can go up
higher than 40
℃
(unventilated metal storage containers or in cars in
summer).
10. Use the tool within it’s design limits.
・
For safe and effective use, only use tool on applications that it’s
capacity can handle.
CAUTION