CHAPTER 13
64
65
SOLO 2 DL
In case the vehicle ignition system has no output you need to connect Solo 2 DL to
the low voltage of the coil as shown in the following images.
Point 1:
low voltage of the coil
Point 2:
connected to the spark plug
Point 3:
connected to the +12V of the battery
Once Solo 2 DL connected to RPM signal you can set its parameters in channels layer
of Race Studio 3.
MANUALE SOLO 2DL .qxp_Layout 1 13/04/18 16:20 Pagina 67
