RC240 3D Mouse Presenter
V1.2
18
Q & A
1. Language:
Q: Does software,
aimMaster™ Pro
, support the language of my
country?
A: Please move the cursor to the
aimMaster™ Pro
icon on the System
Tray. Right Click this icon, and select the “Language” Tab. You will
find a list of the languages. Pick up the one you need. The user
interface will be changed to this language.
2.
aimMaster™ Pro
is not installed:
Q: If I don’t install the software,
aimMaster™ Pro
, can I use RC240?
A: Yes, you can use a lot of functions: Mouse (includes Left and Right
keys), Page Up, Page Down, Scroll Up, Scroll Down, Volume Up
and Volume Down (the small volume window on the right up corner
is not shown). However, the Virtual Laser Pointer is not working. You
can use Mouse cursor for the pointer.
3. Group Vibration
Q: I use another RC240. I press and hold the FEATURE key for 3
seconds trying to let the original Presenter vibrating. But it does not
work.
A. First, you should link the second Presenter with the original Receiver
by pressing and holding the FEATURE key and OK key of the
second Presenter for more than 3 seconds until the purple light on
the LASER key is flashing. Press any key to confirm if it is linked.
Also, both Presenters should be turned on.
4. Slide Show:
Q: Sometimes when I click the POWER key to enter the slide show, the
computer is not responsive.
A. The window of your PowerPoint file is not an active window.
Perhaps you just did some actions on the
aimMaster™ Pro
icon on
the System Tray of your computer. In this case, the window of your
PowerPoint file is inactive. You should make this window active by
moving mouse cursor to this window and make a left click. Then,
clicking the POWER key will open the Slide Show successfully.
