![background image](http://html1.mh-extra.com/html/aim/mytach/mytach_user-manual_2871771006.webp)
MyTach – User Manual
Release 1.04
3 – How to charge the battery
www.aim-sportline.com/mytach
6
MyTach
uses a Lithium battery pack.
1
– Snap
MyTach
into the docking station
2
– Plug the cable to the adapter and in the docking station as
follows:
•
Mini USB connector in the docking station
•
USB connector in the adapter or in the PC (switched on).
3
– When
MyTach
is charging, the message “Charging” and the
percentage of battery status appears on the display.
4
– Disconnect
MyTach
once
charging
is
complete (100%)
By default
MyTach
starts GPS initialization.
When charging is completed the battery indicator has 8 marks and
the duration with GPS switched on is of approximately 9 hours.
After 20 minutes of inactivity or if GPS is disabled (keep “GPS on-off”
pressed for 2”)
MyTach
switches to power save mode and runs only
as a watch.
The duration of the battery in power save mode is about.100 hours.
To exit power save mode keep “GPS on-off” pressed for 2”
NOTE : To start recording battery charge status must have at least 2 marks.