![background image](http://html1.mh-extra.com/html/balanced-body/centerline-pole-system/centerline-pole-system_assembling-manual_3545346001.webp)
Assembling the Balanced Body
®
CenterLine
®
Pole System
READ FIRST
:
IMPORTANT INSTALLATION NOTE
The CenterLine Pole System is designed to be mounted on a wall
with wood studs spaced 16” apart. Be sure the lag bolts go into
the studs. If your wood studs are not 16” apart, a 2x4 (stringer)
may be horizontally mounted to the wall into at least 3 studs.
The top of the Pole System can then be attached to the stringer
using the included lag bolts.
If you do not have wood frame construction,
consult a local hardware store or contractor.
PARTS LIST
PART DESCRIPTION
PART NUMBER
QTY
Curved Pole System Tower top
WLL0201
1
Pole System tube left
WLL0202
1
Pole System tube right
WLL0203
1
Pole System base plate
WLL0200
1
Wooden push-through bar
707-288
1
Maple roll-down bar
607-127
1
Safety strap and carabiner
607-354, GEN9149
1
Cotton loops
607-346
2
Long red springs with snaps
SPR9246
2
Green springs with snaps
SPR9000
1
Red springs with snaps
SPR9001
1
Blue springs with snaps
SPR9004
2
Grey springs with snaps
SPR9245
2
21 mm x 1/2 “ wrench
ALL0060
1
Hardware package
(see Figures A and B)
If you have ordered the complete Pole System package your
shipment will include:
»
Mat (1)
»
Moon boxes (2)
»
Weighted metal roll-up bar (1)
»
24” foot strap (1)
Figure A
Flat Head Bolts GEN9473 (2)
Lag Bolts GEN9415 (4)
Washers GEN9204 (4)
Set Screws GEN9409 (2)
Hex Key GEN9282 (1)
TOOLS YOU WILL NEED (NOT INCLUDED)
»
7/16 wrench
»
Screwdriver (to hold eyebolts in place while tightening)
Figure B:
12 of each: Eyebolt (GEN9086), nut 1/4”-20 (GEN9056) and 1/4” washer
(GEN9206)
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | [email protected]
400-353 | 10.07.16