MyChron4 660
User Manual
Release 1.03
www.aim-sportline.com
27
2.5 – Post Run Review
Once you have acquired data, you are ready to manage them with your gauge.
MyChron4 660
records RPM, 2 temperature inputs and speed at a sampling rate
of 50 Hertz (50 times per second). These data can be recalled for analysis.
MyChron4 660
splits data for runs: each run includes a few seconds before your
launch, your pass and your coast down.
MyChron4 660
has 1MB of non-volatile RAM memory which guarantees the
capacity to record up to 30 minutes at a sampling frequency of 50 Hz per channel.
Using button
MEM
you will access the data stored in the gauge’s memory. Let us
now see how to retrieve data after the completion of a run (or a series of runs).
Session
Summary
The first screen shows the following data:
The first-data-review screen
shows Session Summary. This
page displays information in five sections.
In the first square on top left date and time of the test are
shown.
Summary of Contents for MYCHRON4 660
Page 1: ...USER MANUAL...
